Blackstar has introduced the AMPED 1, a pedal-sized amplifier that can kick out 100 watts of power, and features Blackstars CabRig IR software, and a huge range of power amp response modes.
The AMPED 1 can be used like a traditional amp head, running into any 8 or 16 ohm cabinet that can handle 100 watts. There is also a power-reduction switch that lets you knock down the output to either 20 watts or one watt.
The response of the power amp section is determined by a rotary selector switch, offering a smrgsbord of power tube simulations:
-KT88
-6L6
-EL34
-6V6
-EL84
Theres also a linear mode, which removes any tube compression and squishiness for a clean, high-headroom sound. The onboard preamp has three channels: flat, US and UK. Flat has been designed for when you are using an external preamp pedal or modeller to shape your sound, offering a clear, linear response. The two-band EQ is completely transparent in this mode when both knobs are set to noon.
The US channel is based on classic American amps of the 1960s, so expect clean, Fender-like sounds. The UK channel has a bit more gain, however, is still designed to accept pedals well: its based on a much-loved British Class A amplifier of the early 60s, with a low to medium gain preamp that can be used clean, warm or mildly overdriven
If youd rather run the AMPED 1 direct, you have a lot of options. The unit comes with the same CabRig software thats found in Blackstars Dept 10 drive pedals, and the St James series of amplifiers. This provides extensive DSP simulation of a cabinet, with plenty of deep control over speaker style, microphone type and positioning and room interaction. Deep editing is available through connecting the unit via USB to Blackstars Architect software. The direct tones are accessible through either USB, handy for recording direct into a DAW, or through the XLR output.
Dept. 10 Amped 1, 100 Watt Amp Pedal from Blackstar is 100% original and brand new. We, at Melody House take pride in our after sales service and support. For further details on the Dept. 10 Amped 1, 100 Watt Amp Pedal, Blackstar, simply write to us to consult an expert or order online and we will take care of the rest. Happy Shopping!
Type | Solid State |
Number of Channels | 4 |
Total Power | 100W (20W, 1W settings) |
Reverb | Yes |
EQ | 3-band EQ |
Amp Modeling | Yes |
Number of Models | 6 x Valve Response, 3 x Preamp Voices, 3 x Cab Rig Presets |
Inputs | 1 x 1/4″ |
Outputs | 1 x XLR (cab sim out), 2 x 1/4″ (8 ohm, 16 ohm) |
Headphones | 1 x 1/4″ (line out/headphone) |
Effects Loop | Yes, (series/parallel switchable) |
MIDI I/O | 1 x 1/8″ (in) |
USB | 1 x USB-C |
Cost: | $25 |
Free Shipping: | We offer free shipping on orders over $30. Please check the free - shipping eligibility at checkout. |
Delivery Time: | It usually takes [3-5] business days for standard shipping. Please note that this is an estimated time frame and may be affected by local holidays, and unforeseen circumstances. |
Reviews
There are no reviews yet.